GK 200 Portable Water Well Drilling Rig Advantages
This machine gained 3 national practical new type patents invention.
1. To be equipped with hexagonal vertical shaft and hexagonal drive drilling rod,with strong rigidity and big transfer torque .
2. To be provided with cone plate friction clutch,being facile to operate,with big transfer torque.
3. To adopt rolling bearing type hoist,with wide brake band and big lifting capacity.
4. To be equipped with speed reducer and sludge pump,being integrated structure.
5. The entire machine is featured by stong adaptability,high motive power,low cost and broad compatibility.
6. To be provided with hydraulic control pressure feed mechanism for the purpose of improvement of construction efficiency.
7. To use hydraulic control well head displacement mechanism for enlargement of initial hole diameter.
GK 200 Drilling Rig Application
1.1.1 The rig is suitable for survey and prospecting, geophysical exploration, roads and buildings and other exploration and play blasthole drilling bits projects.
1.1.2 Drilling bits can be chosen according to different strata .
1.1.3. Suitable for the 2-9 grade sandy clay and bedrock.
1.1.4 Rated drilling depth 100m, the deepest can not exceed 120m. Nominal hole diameter of 110mm, the maximum opening straight Diameter allowed to be 130mm, the final hole diameter of 75mm, drilling depth according to ground conditions.
How is soil boring done?
Soil boring is a technique used to survey soil by taking several shallow cores out of the sediment. It is done by supporting a drilling jacket or jack-up rig on the soil and drilling into that soil. Conventional soil boring is used to determine the subsurface soil profile and static soil properties.
Soil engineers bore holes in the soil and take samples. These samples are then tested in order to determine the suitability of the soil. Soil engineers can test the soil before construction, during the construction process and after construction is complete to ensure ongoing compatibility
