OEM Support Crawler Track Undercarriage Hydraulic Motor Driven For Drilling Rig Agriculture Application
Product Description
Rubber Track,Most suitable for small light industry and small construction machinery industry. Light industry is generally agricultural machinery within 1 to 4 tons. The construction machinery industry is mostly used in the small drilling industry.
Product Tech Details
| Product Name |
Track Undercarriage |
| Theoretical speed |
0~10(Km/h) |
|
Four gears, forward 3 and backward 1
Multiple speed, one high and one low speed
|
| Grade ability |
20 ° uphill 20 ° downhill 20 ° rollover angle 25 |
| Track size |
2.3*1.65m Grounding length 1.6m |
| Track specifications |
3.3*1.85m*0.5m |
| Loading Capacity |
4MT |
Product Advantages
1: good stability. Thanks to the crawler structure, the crawler chassis can have very good stability because of its large contact area with the ground when running in application, and can ensure that its running effect is very stable.
2: fast operation. Although compared with the chassis of other structures, the crawler chassis is running at a lower speed, but from its specific performance, it can still reach a faster running speed, and can fully meet everyone's requirements in terms of running speed.
3: lasting operation. In terms of the specific performance of the crawler chassis in the application, it can achieve lasting operation by virtue of its own structure and performance advantages.
Product Application
Crawler chassis assembly is mainly used for special occasions, such as parade, tanks, armored vehicles, etc. What are its advantages: rubber track has the advantages of protecting the ground, rubber track walking system, low noise, low vibration, comfortable riding, etc. It is suitable for situations with high speed and many transfers, and achieves the all-road performance. Reliable electrical instruments and complete machine status monitoring system provide reliable assurance for the driver to operate correctly
Due to the different use methods and soil conditions, the working life of rubber track also varies greatly. Generally speaking, its average life is about 2000 hours. However, when working in rock or easily worn environment, the service life will be halved; On the contrary, the working life will be doubled in a better environment. When the user checks the track and chassis, don't forget to drive again to check the oil level and cleanliness. This part is easy to be ignored, and there is usually less oil left.
Product Working Attentions
(1) It is forbidden to turn sharply on the concrete ground or hard road, otherwise the track core will be worn and the belt body will be twisted.
(2) When crossing the ridge, it is necessary to move forward at a low speed at right angles to the ridge. When crossing the ridge with a height of more than 10 cm, it is necessary to use a springboard, otherwise the track may fall off or be damaged.
(3) It is forbidden to walk and turn sharply for a long time on the gravel road, otherwise the track will be accelerated, worn and cracked.
(4) Do not work on rotten fields, otherwise the track will slip and make the traveling mechanism accumulate mud and tangle grass, affecting the normal operation.
The choice of working environment is as follows:
(1)The temperature of the rubber crawler is generally between -25° + 55°.
(2)The salt of chemicals, oil and seawater will accelerate the aging of the track. In such an environment, the track should be cleaned frequently.
(3)The road surface with sharp protrusions (such as steel bars, stones, etc.) can damage the rubber track.
(4)The edge stone, rut or uneven road surface of the road will cause cracks on the ground side pattern of the track edge. This crack can continue to be used without injuring the steel cord.
(5)Gravel and gravel pavement will cause early wear of the rubber surface in contact with the load-bearing wheel to form a small crack. Severe moisture will invade, causing the core iron to fall off and the steel wire to break.
Jinzhou Shitan Machinery Equipment Co., Ltd. Main Products：
Pneumatic Drilling Rig / Air Drilling Rig（ST-180, ST-200, ST-260, ST-300, ST-350, ST-400, ST450, ST-450, ST-500, ST-600, ST-800 and other Pneumatic water well drilling Rigs.）, Crawler Water Well Drilling Rig / Trailer Mounted Drilling Rig / Water Well Drilling Rig / Hydraulic Borewell Machine / Hard Rock Drilling Equipment / Diamond Core Drill Rig / Geological Drilling Rig / Soil Testing Drilling Rig / Portable Water Well Drilling Rig（ST-30，ST-50，XY-1A, XY-1B, XY-2, XY-2B, GK180, GK200, GY150, GY200 and 30 impact drill rig, ZLJ series tunnel drilling rig and other geological drilling machines）Crawler Track Undercarriage, Drilling Mud Pump（BW150,BW160,BW200,BW250,BW850 series Drilling mud pumps）, Drilling Air Compressor, Water Well Drill Bits（PDC Drill Bit， Tricone Bit， DTH Button Bit）, Water Well Drill Pipe, Drilling Rig Spare Parts( drilling rods , drilling rods joint , casing pipe, casing coupling, core tube, core tube coupling, lifters, automatic drop hammer, sampler, SPT tool, wrench fork, pad fork, lock joint), Track Transporter
OEM / ODM can accept. Good quality, professional after-sales service, welcome to order
Product Tags:
|
|
OEM Support Crawler Track Undercarriage Hydraulic Motor Driven Agriculture Application Images
|
